Gigabyte MP30-AR0: RHEL is running

dmesg and other stuff after the break.

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-0.21.el7.aarch64 (mockbuild@arm64-002.build.eng.bos.redhat.com) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP Tue Oct 6 15:59:59 EDT 2015
[    0.000000] CPU: AArch64 Processor [500f0001] revision 1
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] EFI v2.40 by X-Gene Mp30ar0 Board EFI Feb 22 2016 11:19:37
[    0.000000] efi:  ACPI=0xfffff000  ACPI 2.0=0xfffff014  SMBIOS 3.0=0x7fa89d000 
[    0.000000] cma: Reserved 512 MiB at 0x00000000c0000000
[    0.000000] On node 0 totalpages: 491520
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 32768 pages, LIFO batch:1
[    0.000000]   Normal zone: 448 pages used for memmap
[    0.000000]   Normal zone: 458752 pages, LIFO batch:1
[    0.000000] PERCPU: Embedded 2 pages/cpu @fffffe077fea0000 s90368 r8192 d32512 u131072
[    0.000000] pcpu-alloc: s90368 r8192 d32512 u131072 alloc=2*65536
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 491040
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-0.21.el7.aarch64 root=/dev/mapper/rhel_harm-root ro rd.lvm.lv=rhel_harm/root rd.lvm.lv=rhel_harm/swap acpi=off console=ttyS0,115200 LANG=en_GB.UTF-8
[    0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 4194304 (order: 9, 33554432 bytes)
[    0.000000] Inode-cache hash table entries: 2097152 (order: 8, 16777216 bytes)
[    0.000000] software IO TLB [mem 0xfbfd0000-0xfffd0000] (64MB) mapped at [fffffe007bfd0000-fffffe007ffcffff]
[    0.000000] Memory: 30743552K/31457280K available (7049K kernel code, 1209K rwdata, 4800K rodata, 896K init, 6359K bss, 189440K reserved, 524288K cma-reserved)
[    0.000000] Virtual kernel memory layout:
    vmalloc : 0xfffffc0000000000 - 0xfffffdfedfff0000   (  2043 GB)
    vmemmap : 0xfffffdfee0000000 - 0xfffffdffe0000000   (     4 GB maximum)
              0xfffffdfee0200000 - 0xfffffdfee2000000   (    30 MB actual)
    fixed   : 0xfffffdfffa7d0000 - 0xfffffdfffac00000   (  4288 KB)
    PCI I/O : 0xfffffdfffae00000 - 0xfffffdfffbe00000   (    16 MB)
    modules : 0xfffffdfffc000000 - 0xfffffe0000000000   (    64 MB)
    memory  : 0xfffffe0000000000 - 0xfffffe0780000000   ( 30720 MB)
      .init : 0xfffffe0000c30000 - 0xfffffe0000d10000   (   896 KB)
      .text : 0xfffffe0000080000 - 0xfffffe0000c22524   ( 11914 KB)
      .data : 0xfffffe0000d20000 - 0xfffffe0000e4e400   (  1209 KB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] Architected cp15 timer(s) running at 50.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[    0.000002] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
[    0.000083] Console: colour dummy device 80x25
[    0.000095] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
[    0.000100] pid_max: default: 32768 minimum: 301
[    0.000132] Security Framework initialized
[    0.000138] SELinux:  Initializing.
[    0.000151] SELinux:  Starting in permissive mode
[    0.000203] Mount-cache hash table entries: 65536 (order: 3, 524288 bytes)
[    0.000206] Mountpoint-cache hash table entries: 65536 (order: 3, 524288 bytes)
[    0.000648] Initializing cgroup subsys blkio
[    0.000656] Initializing cgroup subsys memory
[    0.000667] Initializing cgroup subsys devices
[    0.000672] Initializing cgroup subsys freezer
[    0.000675] Initializing cgroup subsys net_cls
[    0.000679] Initializing cgroup subsys perf_event
[    0.000683] Initializing cgroup subsys net_prio
[    0.000697] ftrace: allocating 26044 entries in 7 pages
[    0.019451] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 5 counters available
[    0.019465] Remapping and enabling EFI services.
[    0.019468]   EFI remap 0x00000007fa89a000 => 000000004000a000
[    0.019475]   EFI remap 0x00000007fa89e000 => 000000004001e000
[    0.019478]   EFI remap 0x00000007ffa46000 => 0000000040216000
[    0.019480]   EFI remap 0x00000007ffa5a000 => 000000004023a000
[    0.019482]   EFI remap 0x0000000010510000 => 0000000040270000
[    0.019484]   EFI remap 0x0000000010548000 => 0000000040288000
[    0.019486]   EFI remap 0x0000000017000000 => 0000000040290000
[    0.019487]   EFI remap 0x000000001c025000 => 00000000402a5000
[    0.020384] CPU1: Booted secondary processor
[    0.020388] Detected PIPT I-cache on CPU1
[    0.020530] CPU2: Booted secondary processor
[    0.020533] Detected PIPT I-cache on CPU2
[    0.020669] CPU3: Booted secondary processor
[    0.020671] Detected PIPT I-cache on CPU3
[    0.020798] CPU4: Booted secondary processor
[    0.020801] Detected PIPT I-cache on CPU4
[    0.020931] CPU5: Booted secondary processor
[    0.020933] Detected PIPT I-cache on CPU5
[    0.021057] CPU6: Booted secondary processor
[    0.021060] Detected PIPT I-cache on CPU6
[    0.021202] CPU7: Booted secondary processor
[    0.021204] Detected PIPT I-cache on CPU7
[    0.021235] Brought up 8 CPUs
[    0.021250] SMP: Total of 8 processors activated.
[    0.021252] CPU: All CPU(s) started at EL2
[    0.021777] devtmpfs: initialized
[    0.023021] SMBIOS 3.0.0 present.
[    0.023124] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.023515] atomic64_test: passed
[    0.023716] NET: Registered protocol family 16
[    0.024029] vdso: 2 pages (1 code @ fffffe0000d40000, 1 data @ fffffe0000d30000)
[    0.024044] hw-breakpoint: found 4 breakpoint and 4 watchpoint registers.
[    0.024306] DMA: preallocated 256 KiB pool for atomic allocations
[    0.024346] Serial: AMBA PL011 UART driver
[    0.049940] xgene-msi 79000000.msi: APM X-Gene PCIe MSI driver loaded
[    0.049992] ACPI: Interpreter disabled.
[    0.050127] vgaarb: loaded
[    0.050237] SCSI subsystem initialized
[    0.050305] libata version 3.00 loaded.
[    0.050384] usbcore: registered new interface driver usbfs
[    0.050401] usbcore: registered new interface driver hub
[    0.050448] usbcore: registered new device driver usb
[    0.050490] pps_core: LinuxPPS API ver. 1 registered
[    0.050492] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.050501] PTP clock support registered
[    0.050845] NetLabel: Initializing
[    0.050849] NetLabel:  domain hash size = 128
[    0.050851] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.050869] NetLabel:  unlabeled traffic allowed by default
[    0.050956] clocksource: Switched to clocksource arch_sys_counter
[    0.064660] pnp: PnP ACPI: disabled
[    0.067314] NET: Registered protocol family 2
[    0.067568] TCP established hash table entries: 262144 (order: 5, 2097152 bytes)
[    0.068230] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
[    0.068596] TCP: Hash tables configured (established 262144 bind 65536)
[    0.068627] UDP hash table entries: 16384 (order: 3, 524288 bytes)
[    0.068892] UDP-Lite hash table entries: 16384 (order: 3, 524288 bytes)
[    0.069243] NET: Registered protocol family 1
[    0.069381] RPC: Registered named UNIX socket transport module.
[    0.069384] RPC: Registered udp transport module.
[    0.069386] RPC: Registered tcp transport module.
[    0.069388] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.069396] PCI: CLS 0 bytes, default 64
[    0.069485] Unpacking initramfs...
[    0.452154] Freeing initrd memory: 18496K (fffffe0778700000 - fffffe0779910000)
[    0.452432] kvm [1]: interrupt-controller@780c0000 IRQ5
[    0.452520] kvm [1]: timer IRQ3
[    0.452528] kvm [1]: Hyp mode initialized successfully
[    0.453076] futex hash table entries: 2048 (order: 1, 131072 bytes)
[    0.453099] Initialise system trusted keyring
[    0.453143] audit: initializing netlink subsys (disabled)
[    0.453182] audit: type=2000 audit(0.440:1): initialized
[    0.453455] HugeTLB registered 512 MB page size, pre-allocated 0 pages
[    0.456375] zpool: loaded
[    0.456380] zbud: loaded
[    0.456595] VFS: Disk quotas dquot_6.6.0
[    0.456664] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
[    0.456986] NFS: Registering the id_resolver key type
[    0.457001] Key type id_resolver registered
[    0.457004] Key type id_legacy registered
[    0.457013] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.457199] Key type big_key registered
[    0.457204] SELinux:  Registering netfilter hooks
[    0.463745] NET: Registered protocol family 38
[    0.463760] Key type asymmetric registered
[    0.463765] Asymmetric key parser 'x509' registered
[    0.463798] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.463849] io scheduler noop registered
[    0.463854] io scheduler deadline registered (default)
[    0.463916] io scheduler cfq registered
[    0.464152] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.464165] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.464220] PCI host bridge /soc/pcie@1f2b0000 ranges:
[    0.464225]   No bus range found for /soc/pcie@1f2b0000, using [bus 00-ff]
[    0.464237]    IO 0xf010000000..0xf01000ffff -> 0x00000000
[    0.464244]   MEM 0xf200000000..0xf21fffffff -> 0x20000000
[    0.464247]   MEM 0xe000000000..0xefffffffff -> 0x1000000000
[    0.464278] xgene-pcie 1f2b0000.pcie: (rc) link down
[    0.464337] xgene-pcie 1f2b0000.pcie: PCI host bridge to bus 0000:00
[    0.464342] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.464346] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.464350] pci_bus 0000:00: root bus resource [mem 0xf200000000-0xf21fffffff] (bus address [0x20000000-0x3fffffff])
[    0.464353] pci_bus 0000:00: root bus resource [mem 0xe000000000-0xefffffffff] (bus address [0x1000000000-0x1fffffffff])
[    0.464375] pci 0000:00:00.0: [10e8:e004] type 01 class 0x060400
[    0.464412] pci 0000:00:00.0: IOMMU is currently not supported for PCI
[    0.464441] pci 0000:00:00.0: supports D1 D2
[    0.464593] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.464679] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[    0.464686] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
[    0.464733] aer 0000:00:00.0:pcie02: service driver aer loaded
[    0.464793] PCI host bridge /soc/pcie@1f2c0000 ranges:
[    0.464796]   No bus range found for /soc/pcie@1f2c0000, using [bus 00-ff]
[    0.464803]    IO 0xd010000000..0xd01000ffff -> 0x00000000
[    0.464807]   MEM 0xd180000000..0xd1ffffffff -> 0x80000000
[    0.564870] xgene-pcie 1f2c0000.pcie: (rc) link down
[    0.564923] xgene-pcie 1f2c0000.pcie: PCI host bridge to bus 0001:00
[    0.564927] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.564931] pci_bus 0001:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x0000-0xffff])
[    0.564935] pci_bus 0001:00: root bus resource [mem 0xd180000000-0xd1ffffffff] (bus address [0x80000000-0xffffffff])
[    0.564966] PCI host bridge /soc/pcie@1f2d0000 ranges:
[    0.564968]   No bus range found for /soc/pcie@1f2d0000, using [bus 00-ff]
[    0.564975]    IO 0x9010000000..0x901000ffff -> 0x00000000
[    0.564980]   MEM 0x9180000000..0x91ffffffff -> 0x80000000
[    0.565008] xgene-pcie 1f2d0000.pcie: (rc) x1 gen-1 link up
[    0.565054] xgene-pcie 1f2d0000.pcie: PCI host bridge to bus 0002:00
[    0.565057] pci_bus 0002:00: root bus resource [bus 00-ff]
[    0.565061] pci_bus 0002:00: root bus resource [io  0x20000-0x2ffff] (bus address [0x0000-0xffff])
[    0.565065] pci_bus 0002:00: root bus resource [mem 0x9180000000-0x91ffffffff] (bus address [0x80000000-0xffffffff])
[    0.565081] pci 0002:00:00.0: [10e8:e004] type 01 class 0x060400
[    0.565124] pci 0002:00:00.0: IOMMU is currently not supported for PCI
[    0.565152] pci 0002:00:00.0: supports D1 D2
[    0.565296] pci 0002:01:00.0: [1a03:1150] type 01 class 0x060400
[    0.565410] pci 0002:01:00.0: IOMMU is currently not supported for PCI
[    0.565464] pci 0002:01:00.0: supports D1 D2
[    0.565467] pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.565496] pci 0002:01:00.0: of_irq_parse_pci() failed with rc=-19
[    0.565555] pci 0002:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.565667] pci 0002:02:00.0: [1a03:2000] type 00 class 0x030000
[    0.565732] pci 0002:02:00.0: reg 0x10: [mem 0x30000000-0x30ffffff]
[    0.565755] pci 0002:02:00.0: reg 0x14: [mem 0x31000000-0x3101ffff]
[    0.565778] pci 0002:02:00.0: reg 0x18: [io  0x10000000-0x1000007f]
[    0.565867] pci 0002:02:00.0: IOMMU is currently not supported for PCI
[    0.565900] pci 0002:02:00.0: supports D1 D2
[    0.565902] pci 0002:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.565988] vgaarb: device added: PCI:0002:02:00.0,decodes=io+mem,owns=none,locks=none
[    0.566130] pci 0002:00:00.0: BAR 14: assigned [mem 0x9180000000-0x91817fffff]
[    0.566134] pci 0002:00:00.0: BAR 13: assigned [io  0x20000-0x20fff]
[    0.566138] pci 0002:01:00.0: BAR 14: assigned [mem 0x9180000000-0x91817fffff]
[    0.566141] pci 0002:01:00.0: BAR 13: assigned [io  0x20000-0x20fff]
[    0.566145] pci 0002:02:00.0: BAR 0: assigned [mem 0x9180000000-0x9180ffffff]
[    0.566153] pci 0002:02:00.0: BAR 1: assigned [mem 0x9181000000-0x918101ffff]
[    0.566161] pci 0002:02:00.0: BAR 2: assigned [io  0x20000-0x2007f]
[    0.566169] pci 0002:01:00.0: PCI bridge to [bus 02]
[    0.566174] pci 0002:01:00.0:   bridge window [io  0x20000-0x20fff]
[    0.566184] pci 0002:01:00.0:   bridge window [mem 0x9180000000-0x91817fffff]
[    0.566202] pci 0002:00:00.0: PCI bridge to [bus 01-02]
[    0.566205] pci 0002:00:00.0:   bridge window [io  0x20000-0x20fff]
[    0.566211] pci 0002:00:00.0:   bridge window [mem 0x9180000000-0x91817fffff]
[    0.566289] pcieport 0002:00:00.0: Signaling PME through PCIe PME interrupt
[    0.566293] pci 0002:01:00.0: Signaling PME through PCIe PME interrupt
[    0.566295] pci 0002:02:00.0: Signaling PME through PCIe PME interrupt
[    0.566301] pcie_pme 0002:00:00.0:pcie01: service driver pcie_pme loaded
[    0.566350] aer 0002:00:00.0:pcie02: service driver aer loaded
[    0.566427] PCI host bridge /soc/pcie@1f500000 ranges:
[    0.566431]   No bus range found for /soc/pcie@1f500000, using [bus 00-ff]
[    0.566439]    IO 0xb010000000..0xb01000ffff -> 0x00000000
[    0.566444]   MEM 0xb200000000..0xb21fffffff -> 0x20000000
[    0.566448]   MEM 0xa000000000..0xafffffffff -> 0x1000000000
[    0.566477] xgene-pcie 1f500000.pcie: (rc) link down
[    0.566525] xgene-pcie 1f500000.pcie: PCI host bridge to bus 0003:00
[    0.566529] pci_bus 0003:00: root bus resource [bus 00-ff]
[    0.566533] pci_bus 0003:00: root bus resource [io  0x30000-0x3ffff] (bus address [0x0000-0xffff])
[    0.566537] pci_bus 0003:00: root bus resource [mem 0xb200000000-0xb21fffffff] (bus address [0x20000000-0x3fffffff])
[    0.566540] pci_bus 0003:00: root bus resource [mem 0xa000000000-0xafffffffff] (bus address [0x1000000000-0x1fffffffff])
[    0.566556] pci 0003:00:00.0: [10e8:e004] type 01 class 0x060400
[    0.566587] pci 0003:00:00.0: IOMMU is currently not supported for PCI
[    0.566613] pci 0003:00:00.0: supports D1 D2
[    0.566747] pci 0003:00:00.0: PCI bridge to [bus 01]
[    0.566820] pcieport 0003:00:00.0: Signaling PME through PCIe PME interrupt
[    0.566826] pcie_pme 0003:00:00.0:pcie01: service driver pcie_pme loaded
[    0.566871] aer 0003:00:00.0:pcie02: service driver aer loaded
[    0.566929] PCI host bridge /soc/pcie@1f510000 ranges:
[    0.566931]   No bus range found for /soc/pcie@1f510000, using [bus 00-ff]
[    0.566938]    IO 0xc010000000..0xc01000ffff -> 0x00000000
[    0.566942]   MEM 0xc180000000..0xc1ffffffff -> 0x80000000
[    0.667007] xgene-pcie 1f510000.pcie: (rc) link down
[    0.667060] xgene-pcie 1f510000.pcie: PCI host bridge to bus 0004:00
[    0.667064] pci_bus 0004:00: root bus resource [bus 00-ff]
[    0.667068] pci_bus 0004:00: root bus resource [io  0x40000-0x4ffff] (bus address [0x0000-0xffff])
[    0.667071] pci_bus 0004:00: root bus resource [mem 0xc180000000-0xc1ffffffff] (bus address [0x80000000-0xffffffff])
[    0.667232] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.667779] console [ttyS0] disabled
[    0.667809] 1c020000.serial: ttyS0 at MMIO 0x1c020000 (irq = 35, base_baud = 3125000) is a 16550A
[    2.009244] console [ttyS0] enabled
[    2.012965] 1c021000.serial: ttyS1 at MMIO 0x1c021000 (irq = 36, base_baud = 3125000) is a 16550A
[    2.021966] 1c022000.serial: ttyS2 at MMIO 0x1c022000 (irq = 37, base_baud = 3125000) is a 16550A
[    2.030944] 1c023000.serial: ttyS3 at MMIO 0x1c023000 (irq = 38, base_baud = 3125000) is a 16550A
[    2.040073] Unable to detect cache hierarchy from DT for CPU 0
[    2.045908] rdac: device handler registered
[    2.050102] hp_sw: device handler registered
[    2.054357] emc: device handler registered
[    2.058432] alua: device handler registered
[    2.062778] xgene-ahci 1a400000.sata: skip clock and PHY initialization
[    2.069368] xgene-ahci 1a400000.sata: controller can't do NCQ, turning off CAP_NCQ
[    2.076929] xgene-ahci 1a400000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    2.085935] xgene-ahci 1a400000.sata: flags: 64bit sntf pm only pmp fbs pio slum part ccc 
[    2.094165] xgene-ahci 1a400000.sata: port 0 is not capable of FBS
[    2.100380] xgene-ahci 1a400000.sata: port 1 is not capable of FBS
[    2.106874] scsi host0: xgene-ahci
[    2.110392] scsi host1: xgene-ahci
[    2.113851] ata1: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x100 irq 45
[    2.121733] ata2: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x180 irq 45
[    2.129640] xgene-ahci 1a800000.sata: skip clock and PHY initialization
[    2.136234] xgene-ahci 1a800000.sata: controller can't do NCQ, turning off CAP_NCQ
[    2.143788] xgene-ahci 1a800000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[    2.152794] xgene-ahci 1a800000.sata: flags: 64bit sntf pm only pmp fbs pio slum part ccc 
[    2.161020] xgene-ahci 1a800000.sata: port 0 is not capable of FBS
[    2.167194] xgene-ahci 1a800000.sata: port 1 is not capable of FBS
[    2.173666] scsi host2: xgene-ahci
[    2.177165] scsi host3: xgene-ahci
[    2.180613] ata3: SATA max UDMA/133 mmio [mem 0x1a800000-0x1a800fff] port 0x100 irq 46
[    2.188497] ata4: SATA max UDMA/133 mmio [mem 0x1a800000-0x1a800fff] port 0x180 irq 46
[    2.196489] libphy: Fixed MDIO Bus: probed
[    2.203170] xhci-hcd 19000000.dwusb: xHCI Host Controller
[    2.208626] xhci-hcd 19000000.dwusb: new USB bus registered, assigned bus number 1
[    2.216282] xhci-hcd 19000000.dwusb: hcc params 0x0220f06d hci version 0x100 quirks 0x00010010
[    2.224870] xhci-hcd 19000000.dwusb: irq 47, io mem 0x19000000
[    2.230736] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.237494] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.244681] usb usb1: Product: xHCI Host Controller
[    2.249532] usb usb1: Manufacturer: Linux 4.2.0-0.21.el7.aarch64 xhci-hcd
[    2.256287] usb usb1: SerialNumber: 19000000.dwusb
[    2.261245] hub 1-0:1.0: USB hub found
[    2.264983] hub 1-0:1.0: 1 port detected
[    2.268992] xhci-hcd 19000000.dwusb: xHCI Host Controller
[    2.274429] xhci-hcd 19000000.dwusb: new USB bus registered, assigned bus number 2
[    2.281990] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.290070] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    2.296828] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.304015] usb usb2: Product: xHCI Host Controller
[    2.308866] usb usb2: Manufacturer: Linux 4.2.0-0.21.el7.aarch64 xhci-hcd
[    2.315620] usb usb2: SerialNumber: 19000000.dwusb
[    2.320547] hub 2-0:1.0: USB hub found
[    2.324288] hub 2-0:1.0: 1 port detected
[    2.328316] xhci-hcd 19800000.dwusb: xHCI Host Controller
[    2.333770] xhci-hcd 19800000.dwusb: new USB bus registered, assigned bus number 3
[    2.341410] xhci-hcd 19800000.dwusb: hcc params 0x0220f06d hci version 0x100 quirks 0x00010010
[    2.349990] xhci-hcd 19800000.dwusb: irq 48, io mem 0x19800000
[    2.355843] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.362605] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.369789] usb usb3: Product: xHCI Host Controller
[    2.374645] usb usb3: Manufacturer: Linux 4.2.0-0.21.el7.aarch64 xhci-hcd
[    2.381402] usb usb3: SerialNumber: 19800000.dwusb
[    2.386355] hub 3-0:1.0: USB hub found
[    2.390093] hub 3-0:1.0: 1 port detected
[    2.394095] xhci-hcd 19800000.dwusb: xHCI Host Controller
[    2.399525] xhci-hcd 19800000.dwusb: new USB bus registered, assigned bus number 4
[    2.407086] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.415169] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    2.421930] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.429114] usb usb4: Product: xHCI Host Controller
[    2.433969] usb usb4: Manufacturer: Linux 4.2.0-0.21.el7.aarch64 xhci-hcd
[    2.440721] usb usb4: SerialNumber: 19800000.dwusb
[    2.445679] hub 4-0:1.0: USB hub found
[    2.449416] hub 4-0:1.0: 1 port detected
[    2.453439] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.459940] ehci-pci: EHCI PCI platform driver
[    2.464390] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.470543] ohci-pci: OHCI PCI platform driver
[    2.470961] ata2: SATA link down (SStatus 0 SControl 4300)
[    2.480440] uhci_hcd: USB Universal Host Controller Interface driver
[    2.486889] usbcore: registered new interface driver usbserial
[    2.492726] usbcore: registered new interface driver usbserial_generic
[    2.499257] usbserial: USB Serial support registered for generic
[    2.505365] mousedev: PS/2 mouse device common for all mice
[    2.511053] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
[    2.517516] EFI Variables Facility v0.08 2004-May-17
[    2.522626] hidraw: raw HID events driver (C) Jiri Kosina
[    2.528080] usbcore: registered new interface driver usbhid
[    2.533629] usbhid: USB HID core driver
[    2.537498] drop_monitor: Initializing network drop monitor service
[    2.543860] Initializing XFRM netlink socket
[    2.548315] NET: Registered protocol family 10
[    2.550957] ata4: SATA link down (SStatus 0 SControl 4300)
[    2.550972] ata3: SATA link down (SStatus 0 SControl 4300)
[    2.564094] NET: Registered protocol family 17
[    2.568550] Key type dns_resolver registered
[    2.573061] Loading compiled-in X.509 certificates
[    2.579266] Loaded X.509 cert 'Red Hat Enterprise Linux Server for ARM kernel signing key: 342d3ce722f80e91397d5565f2f74bcd7ccc486b'
[    2.591204] registered taskstats version 1
[    2.595307] zswap: loading zswap
[    2.598519] zswap: using zbud pool
[    2.601921] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    2.608444] zswap: using lzo compressor
[    2.612544] rtc-efi rtc-efi: setting system clock to 2016-03-05 14:48:14 UTC (1457189294)
[    2.710956] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    2.751558] usb 1-1: New USB device found, idVendor=0624, idProduct=0248
[    2.758225] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.765330] usb 1-1: Product: Gadget USB HUB
[    2.769575] usb 1-1: Manufacturer: no manufacturer
[    2.774345] usb 1-1: SerialNumber: 0123456789
[    2.794156] hub 1-1:1.0: USB hub found
[    2.797990] hub 1-1:1.0: 5 ports detected
[    2.859751] usb 3-1: New USB device found, idVendor=0bda, idProduct=5401
[    2.866425] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.873526] usb 3-1: Product: USB3.0 Hub
[    2.877427] usb 3-1: Manufacturer: Realtek
[    2.887164] hub 3-1:1.0: USB hub found
[    2.892058] hub 3-1:1.0: 4 ports detected
[    3.100955] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
[    3.170953] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd
[    3.211660] usb 1-1.1: New USB device found, idVendor=0624, idProduct=0249
[    3.218498] usb 1-1.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
[    3.225774] usb 1-1.1: Product: Keyboard/Mouse Function
[    3.230974] usb 1-1.1: Manufacturer: Avocent
[    3.235220] usb 1-1.1: SerialNumber: 20121018
[    3.242807] input: Avocent Keyboard/Mouse Function as /devices/platform/soc/19000000.dwusb/usb1/1-1/1-1.1/1-1.1:1.0/0003:0624:0249.0001/input/input0
[    3.291277] usb 3-1.1: New USB device found, idVendor=0781, idProduct=5567
[    3.298116] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.305393] usb 3-1.1: Product: Cruzer Blade
[    3.309640] usb 3-1.1: Manufacturer: SanDisk
[    3.313891] usb 3-1.1: SerialNumber: 4C530300320318114534
[    3.319508] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-19000000.dwusb-1.1/input0
[    3.333658] input: Avocent Keyboard/Mouse Function as /devices/platform/soc/19000000.dwusb/usb1/1-1/1-1.1/1-1.1:1.1/0003:0624:0249.0002/input/input1
[    3.347044] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-19000000.dwusb-1.1/input1
[    3.360743] input: Avocent Keyboard/Mouse Function as /devices/platform/soc/19000000.dwusb/usb1/1-1/1-1.1/1-1.1:1.2/0003:0624:0249.0003/input/input2
[    3.374118] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-19000000.dwusb-1.1/input2
[    5.100957] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 4300)
[    5.119900] ata1.00: ATA-9: INTEL SSDSC2BW120A4, DC32, max UDMA/133
[    5.126145] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    5.138032] ata1.00: LPM support broken, forcing max_power
[    5.145006] ata1.00: configured for UDMA/133
[    5.161126] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2BW12 DC32 PQ: 0 ANSI: 5
[    5.169426] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    5.176957] sd 0:0:0:0: [sda] Write Protect is off
[    5.181729] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.181755] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.191958]  sda: sda1 sda2 sda3
[    5.195598] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.200536] Freeing unused kernel memory: 896K (fffffe0000c30000 - fffffe0000d10000)
[    5.212914] random: systemd urandom read with 4 bits of entropy available
[    5.221884] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.239951] systemd[1]: Detected architecture arm64.
[    5.244906] systemd[1]: Running in initial RAM disk.
[    5.271065] systemd[1]: Set hostname to .
[    5.341030] systemd[1]: Reached target Swap.
[    5.345300] systemd[1]: Starting Swap.
[    5.371002] systemd[1]: Reached target Local File Systems.
[    5.376479] systemd[1]: Starting Local File Systems.
[    5.400993] systemd[1]: Created slice -.slice.
[    5.405432] systemd[1]: Starting -.slice.
[    5.430990] systemd[1]: Created slice System Slice.
[    5.435861] systemd[1]: Starting System Slice.
[    5.460988] systemd[1]: Listening on udev Kernel Socket.
[    5.466289] systemd[1]: Starting udev Kernel Socket.
[    5.490990] systemd[1]: Listening on Journal Socket.
[    5.495949] systemd[1]: Starting Journal Socket.
[    5.500633] systemd[1]: Started dracut ask for additional cmdline parameters.
[    5.508554] systemd[1]: Starting Journal Service...
[    5.532077] systemd[1]: Starting dracut cmdline hook...
[    5.551258] systemd[1]: Started Load Kernel Modules.
[    5.557110] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    5.611019] systemd[1]: Reached target Slices.
[    5.615467] systemd[1]: Starting Slices.
[    5.641024] systemd[1]: Listening on udev Control Socket.
[    5.646430] systemd[1]: Starting udev Control Socket.
[    5.671022] systemd[1]: Reached target Sockets.
[    5.675559] systemd[1]: Starting Sockets.
[    5.680434] systemd[1]: Starting Apply Kernel Variables...
[    5.711805] systemd[1]: Starting Setup Virtual Console...
[    5.751005] systemd[1]: Reached target Timers.
[    5.755451] systemd[1]: Starting Timers.
[    5.781009] systemd[1]: Started Journal Service.
[    5.916956] device-mapper: uevent: version 1.0.3
[    5.922724] device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@redhat.com
[    6.079871] usb-storage 3-1.1:1.0: USB Mass Storage device detected
[    6.086317] scsi host4: usb-storage 3-1.1:1.0
[    6.090786] usbcore: registered new interface driver usb-storage
[    6.099126] usbcore: registered new interface driver uas
[    6.102042] [drm] Initialized drm 1.1.0 20060810
[    6.122670] [drm] AST 2400 detected
[    6.126162] [drm] Analog VGA only
[    6.129478] [drm] dram 1632000000 1 16 01000000
[    6.134120] [TTM] Zone  kernel: Available graphics memory: 15643616 kiB
[    6.140704] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    6.147253] [TTM] Initializing pool allocator
[    6.151635] [TTM] Initializing DMA pool allocator
[    6.177620] Console: switching to colour frame buffer device 128x48
[    6.213480] ast 0002:02:00.0: fb0: astdrmfb frame buffer device
[    6.213484] ast 0002:02:00.0: registered panic notifier
[    6.281031] [drm] Initialized ast 0.1.0 20120228 for 0002:02:00.0 on minor 0
[    6.488154] SGI XFS with ACLs, security attributes, no debug enabled
[    6.496358] XFS (dm-0): Mounting V4 Filesystem
[    6.513522] XFS (dm-0): Ending clean mount
[    6.869999] systemd-journald[158]: Received SIGTERM from PID 1 (systemd).
[    6.902929] audit: type=1404 audit(1457189298.780:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    6.988925] SELinux: 32768 avtab hash slots, 112391 rules.
[    7.022265] SELinux: 32768 avtab hash slots, 112391 rules.
[    7.081786] scsi 4:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.27 PQ: 0 ANSI: 6
[    7.089613] SELinux:  8 users, 105 roles, 4954 types, 302 bools, 1 sens, 1024 cats
[    7.089614] SELinux:  83 classes, 112391 rules
[    7.092267] sd 4:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    7.098064] SELinux:  Class netlink_iscsi_socket not defined in policy.
[    7.098070] SELinux:  Class netlink_fib_lookup_socket not defined in policy.
[    7.098071] SELinux:  Class netlink_connector_socket not defined in policy.
[    7.098072] SELinux:  Class netlink_netfilter_socket not defined in policy.
[    7.098081] SELinux:  Class netlink_generic_socket not defined in policy.
[    7.098082] SELinux:  Class netlink_scsitransport_socket not defined in policy.
[    7.098083] SELinux:  Class netlink_rdma_socket not defined in policy.
[    7.098084] SELinux:  Class netlink_crypto_socket not defined in policy.
[    7.098101] SELinux:  Permission audit_read in class capability2 not defined in policy.
[    7.098105] SELinux:  Class binder not defined in policy.
[    7.098106] SELinux: the above unknown classes and permissions will be allowed
[    7.098120] SELinux:  Completing initialization.
[    7.098121] SELinux:  Setting up existing superblocks.
[    7.175186] sd 4:0:0:0: [sdb] Write Protect is off
[    7.179952] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    7.180183] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    7.199684] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    7.214006] audit: type=1403 audit(1457189299.090:3): policy loaded auid=4294967295 ses=4294967295
[    7.232074] systemd[1]: Successfully loaded SELinux policy in 329.645ms.
[    7.274179] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.279488] systemd[1]: Inserted module 'ip_tables'
[    7.328308] systemd[1]: Relabelled /dev and /run in 39.288ms.
[    7.579641] systemd-journald[535]: Received request to flush runtime journal from PID 1
[    8.402977] xgene-gpio-sb 17001000.sbgpio: X-Gene GPIO Standby driver registered
[    8.430180] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.432589] EDAC MC: Ver: 3.0.0
[    8.438780] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    8.556462] Adding 11722688k swap on /dev/mapper/rhel_harm-swap.  Priority:-1 extents:1 across:11722688k SSFS
[    8.567585] XFS (sda2): Mounting V4 Filesystem
[    8.583701] XFS (sda2): Ending clean mount
[    8.662511] XFS (dm-2): Mounting V4 Filesystem
[    8.674264] XFS (dm-2): Ending clean mount
[    8.832902] audit: type=1305 audit(1457189300.710:4): audit_pid=675 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
[    9.218035] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    9.248720] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.331712] Ebtables v2.0 registered
[    9.356514] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    9.777445] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    9.783483] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    9.792637] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[    9.798605] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[    9.807226] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.813248] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.821909] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[    9.827865] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[    9.843728] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    9.851091] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[    9.859096] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.867204] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[   11.811001] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.817627] xgene-enet 1f210000.ethernet eth0: Link is Up - 1Gbps
[   11.823738] xgene-enet 1f610000.ethernet eth2: Link is Up - 10Gbps
[   11.829897] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[   44.239627] random: nonblocking pool is initialized
[  639.790974] xgene-enet 1f620000.ethernet eth3: Link is Up - 10Gbps
[  639.797139] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
[  649.800961] xgene-enet 1f620000.ethernet eth3: Link is Down

cpuinfo:

processor	: 0
Features	: fp asimd evtstrm
CPU implementer	: 0x50
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0x000
CPU revision	: 1

processor	: 1
Features	: fp asimd evtstrm
CPU implementer	: 0x50
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0x000
CPU revision	: 1

processor	: 2
Features	: fp asimd evtstrm
CPU implementer	: 0x50
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0x000
CPU revision	: 1

processor	: 3
Features	: fp asimd evtstrm
CPU implementer	: 0x50
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0x000
CPU revision	: 1

processor	: 4
Features	: fp asimd evtstrm
CPU implementer	: 0x50
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0x000
CPU revision	: 1

processor	: 5
Features	: fp asimd evtstrm
CPU implementer	: 0x50
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0x000
CPU revision	: 1

processor	: 6
Features	: fp asimd evtstrm
CPU implementer	: 0x50
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0x000
CPU revision	: 1

processor	: 7
Features	: fp asimd evtstrm
CPU implementer	: 0x50
CPU architecture: 8
CPU variant	: 0x0
CPU part	: 0x000
CPU revision	: 1

lspci -vvv:

0000:00:00.0 PCI bridge: Applied Micro Circuits Corp. X-Gene PCIe bridge (rev 04) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- TAbort- <TAbort- <MAbort- <SERR- Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 512 bytes, PhantFunc 0
			ExtTag- RBE+
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
		LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
			ClockPM- Surprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [80] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [180 v1] #19
	Capabilities: [150 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 
	Kernel driver in use: pcieport

0002:00:00.0 PCI bridge: Applied Micro Circuits Corp. X-Gene PCIe bridge (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- TAbort- <TAbort- <MAbort- <SERR- Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0
			ExtTag- RBE+
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
			ClockPM- Surprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #1, PowerLimit 10.000W; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState+
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [80] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [180 v1] #19
	Capabilities: [150 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 
	Kernel driver in use: pcieport

0002:01:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- SERR- TAbort- <TAbort- <MAbort- <SERR- Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [78] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [80] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 TAbort- <TAbort- SERR- TAbort- <TAbort- SERR- TAbort- <TAbort- <MAbort- <SERR- Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 512 bytes, PhantFunc 0
			ExtTag- RBE+
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend+
		LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
			ClockPM- Surprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [80] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [180 v1] #19
	Capabilities: [150 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 
	Kernel driver in use: pcieport